Tecnoma KT 2

main-spec-Tecnoma_KT2.jpg

Tecnoma KT 2 Edge Bander

GLUE UNIT

  • Alloy aluminium pot for hot melt glue with independent and adjustable coping movement
  • Glue pot coated internally with anti-sticking material
  • Speed rotation of the glue roller synchronized with the feed-chain speed
  • Spreading glue on the panel is gauged by adjusting the glue distribution regulator
  • Unused glue is automatically recuperated
  • Electronic digital thermo-regulator to set the correct working temperature of glue
  • Glue pre-heating system when not in use to maintain glue temperature
  • Glue stays at working temperature without burning, saving time when re-starting machine
  • Electronic thermo-regulator enables temperature of glue to be automatically lowered

EDGE FEEDING UNIT

  • automatic feeding of the edge in rolls/coils up to 2 mm thickness
  • Manual feeding of the edge in strips up to 2 mm thickness
  • Shearing device for edge in rolls/coils up to 2 mm thickness with a quick off-work system

    • EDGE PRESSURE UNIT with 2 pressure rollers

    • Adjustable, changing the edge thickness, with a mechanical digital indicator
    • Both rollers are equipped with spring pressure

    END TRIMMING UNIT

    • Pneumatic with knife to cut at 90 degrees
    • Cutting group moves on hardened and ground steel guides
    • Cut from the side of the panel, to prevent edge cuts disturbing working parts

    TOP AND BOTTOM EDGE TRIMMING UNIT

  • 2 high frequency motors to trim upper & lower edge excess
  • Operating unit automatically positions itself when changing the thickness of the panel
  • Unit slides vertically & horizontally on hardened & ground steel guides
  • Recirculating ball-bearing bushes guarantee the maximum working precision
  • Vertical horizontal thick chrome coated copying shoes on each cutting unit
  • Adjustable copying sensibility on vertical and horizontal floating movements
  • Adjustable cutting position by mechanical digital indicator
  • Quick release (electrical and mechanical) of the motors to facilitate work change

    • ALL MACHINES ARE MANUFACTURED STANDARD WITH:

    • E. C. safety regulations
    • Static high frequency converter
    • protection cover â�� centralized dust extraction
    • Adjustable rollers support for large panels, to the complete length of the machine
    • Protection/copying plate in front of glue roller
    • Control switches on the panel in-feed position, easy to use for the operator
    • One pair of radius cutters R= 2 mm with replaceable TCT knives

    TECHNICAL DATA

    • Edge thickness: 0.4 2mm
    • Edge thickness in pre-cut strips: 1 - 2mm
    • Working Height: 10 - 45mm
    • Minimum working width: 65mm
    • Minimum working length: 180mm
    • Panel feed speed: 5 mt/min
    • Static high frequency converter: 200 Hz
    • Centralised dust extraction hood diameter: 2x80mm
    • Extraction quantity required: 450 mc/h
    • Pneumatic system pressure: 7 bar
    • ** 2mm thick edges for a panel thickness max. 25mm
    • With thicker panels max. edge thickness 1.5mm

    GLUE POT

    • Heating Power: 2.4Kw

    FRONT AND REAR END - TRIMMING UNIT

    • Pneumatic, with cutting knife

    TOP AND BOTTOM EDGE TRIMMING UNIT

    • Power of each of the 2 motors (200Hz): 0.35Kw
    • Cutters Rotation Speed: 12000 rpm

    Included, one pair of radius cutters R = 2 mm with replaceable TCT knives

    £
    POA
    Enquire...